La Fourmi
Sculpture en skateboard et fil d'alu
Date: 2022-11-21
Lieu: Pinchat
Lien
Réalisations de brosses en skateboard.
Date: 2022-10-30
Boîte skateboard
Boîte tournée en chêne et skateboard
Date: 2022-08-22
Plat
Plat en skateboard et bois croisé
Date: 2022-08-01
Pins and needle box
Some images of one of my pins and needle box. The wood is turned on the lathe and the cover is made of fabric and cardboard.
Date: 2022-04-04
Skateboard & plywood music box
A variation on the patterned plywood using an old skateboard to bring some color...
Date: 2022-02-14
Yew wooden scale for the Windeler stack
I have backed Windeler project when it was on Kickstarter. Nice tool! But it was clearly missing a magnetic wooden scale.
For this project I used the disc sander and pillar drill at Le Grand Atelier (https://www.legrandatelier.ch/) which is part of La Maco (http://www.lamaco.ch/)
Date: 2021-11-26
Sewed SAK scales
Got inspired by Kevin Manville's work (https://www.kevinmanvilledesign.com/).
Date: 2021-10-18
Laser cut SAK scales
Date: 2021-08-13
SAK scales "Epi de ble?"
Date: 2021-05-17
Epoxy resin and spalted wood SAK scales
Playing with resin.
Date: 2021-01-03
Alpine Pattern Knife
Inspired by Michael Alm's video https://www.youtube.com/watch?v=bJCWEfvT_wU
Date: 2021-01-03
Hardwood Braiding Pattern custom SAK (SWIZA) scales
End to end making of:
- Initial drawing,
- cutting and adjusting the wood,
- gluing the wood,
- splitting the wood block,
- cutting to size,
- making pocket for everything protruding from the knife,
- making the push button,
- shaping the scales
- sanding
- finishing
- gluing
- finished knife
The knife was bought in a local store, wood from (old) sampler:
- bubinga wood
- pear wood
- beech wood
Date: 2020-05-31
Covid19 wind-Chimes
Since few weeks I am confined with few tools, no real workshop and no way to buy supply. My only available power tool is a drill.
I had few wood rods so I decide to create a virus out of it using my drill as a lathe. I went for a dodecahedron (as regular as possible) with 20 mushroom-like corner pieces to figure the protein.
I first wanted to connect the different pieces using elastic string, however the one I had from my sewing kit where to weak. So I glued everything using string to maintain the pieces while the glue cured.
Once the virus was done I found in my basement an aluminium tube juste below 2m long and decide to use it for creating chimes. I have found a spread-sheet computing tube length on Lee Hite's site (http://leehite.org/Chimes.htm) works perfectly!
Date: 2020-04-04
Plywood stars pattern custom SAK (SWIZA) handle
The video shows:
- the gluing of the plywood pieces to create a star pattern
- cutting the result wood block
- some pictures of the shaping and the completed knife
Music: Some personal experiment
Date: 2020-02-29
Croix de Charpentier
Réalisation d'une croix de charpentier
Date: 2016-01-08